Register now to gain access to all of our features. Once registered and logged in, you will be able to contribute to this site by submitting your own content or replying to existing content. You'll be able to customize your profile, receive reputation points as a reward for submitting content, while also communicating with other members via your own private inbox, plus much more! This message will be removed once you have signed in.
-
Content count
5054 -
Joined
-
Last visited
Posts posted by Admin
-
-
CIFRA-9-external panel directional antenna with gain up to 9.5 dBi
Universal remote panel antenna for receiving and amplifying digital (DVB-T, DVB-T2) and analog (DMV) television. The connector type is F-female.
Electrical characteristics
Operating frequency range, MHz 470-790
Gain, dBi 7.5-9.5
Bottom width in the H-plane, deg 59÷91
Bottom width in the E-plane, deg 49-80
Input impedance, Ohms 75
SWR in the operating frequency range, max. 1.9
Polarisation vertical/horizontal/inclined
Mechanical characteristics
Weight with mounting, g 1840
Overall dimensions without mounting, m 0.3 x 0.3 x 0.12
Connector F-female
The diameter of the mast, mm 30÷52
The emitter material, plating galvanized steel, polymer coating
Material of the protective box Polycarbonate+ABS
Operating temperature range, centigrade -40...+60
2 people like this -
-
,,, which is the latest design...???
-
2 people like this -
the driven element=0,5x47x47mm(or o,5x44x44mm) h=5mm
1 person likes this -
-
,,,thanks buddy...!!!
-
-
Universal 3G / 4G MIMO 2x2 irradiator for parabolic reflector ("plates"). F=1700-2700 MHz. It works in the LTE1800, DC-HSPA+, LTE2600, and WIFI2400 standards. Equipped with F-female connectors. KY=9dBi.
Own the coefficient of the radiator, dBi 8÷10
Polarisation -Vertical/ horizontal / inclined
Width of the bottom of the irradiator in the plane of the vector E at the level of -10dB, deg-86 - 130
Width of the bottom of the irradiator in the plane of the vector H at the level of -10dB, deg-104 - 116
Input impedance, Ohms-75
Decoupling between inputs in the operating range, dB-More than 28
SWR in the operating frequency range, max.1,8
Permissible power, 10W
Overall dimensions, mm 140 x 140 x 140
Weight, g350
Connector 2 x F-female
Material of the protective cover Polycarbonate+ABS
Antenna material galvanized steel
Protective coating powdered polymer paint
1 person likes this -
,,, okay, but what other files can you give me ... ??
-
I can"t open *cdr.file ,can you send to me *sat.file,*ipt.file,*igs.file or *step.file...!!!???
-
,,,okay erossutrisno,I will try to do a simulation for you...
1 person likes this -
,,,for 2,4 GHz...!!
-
,,, for the 75 Ohm cable, it needs to be resized...!!!
2 people like this -
-
Another fake...https://3g-aerial.biz/wi-fi-3g-4g-pushka-analiz-i-raschet
,,, and to demonstrate this, look at the Bester antenna simulation for the 2.2 GHz frequency...
,,, if it is desired to respect the dimensions given by
the CANTENNATOR calculator, must take this situation into account(I mean the pin-connection from SMA connector and vibrator)....,,, and here is the result....>>>
-
-
,,, the thickness of the reflector does not matter...!!!
-
-
-
,,, it is best not to use two connectors on a single antenna but to use two antennas with one connector each...!!!
-
,,, yes, you can use the mesh instead of the reflector,but with the square of 10x10 mm...!!
-
-
,,, spark, I told you before, why don't you look carefully on this site...











in Modeling antennas
Posted
,,,, no, not with these dimensions ... !!!
,,, here is an example ...