Admin

,,, by the way, maybe something like that could be used as crossed dipole...

,,,from Sl4va...

,,, maybe yes, but you need other distances between the biquad antenna..!!!

,,, then try to transposes this type of antenna on the frequency range 1.7-2.7 GHz...!!!

,,,a Bester Antenna after Harry36...

,,, and these dimensions are important...

,,,a fake batwing antenna 1700-2700, 8.7-9.7 dBi @ 50 Ohm from Yurii Pylypenko (ypylypenko) wrote... ,,, and here are my results ...

,,, another situation would be if SMA connectors were attached to the REFLECT0R...!!!

,,,only if you give me all the dimensions on the antenna....!!!

Harry36-user,he meant other batwings, not even batwings, but Sputnik V. Sputnik V,, put in a bucket... ,,IMAGINE...

Powerful budget broadband panel antenna 2G / 3G/4G / WIFI. Gain 17.5-20.0 dBi. Ra=75 ohms, MIMO. General information: The ZETA F MIMO panel antenna is designed for use in a set of equipment for wireless data transmission systems.: cellular communication (GSM1800) 2G (EDGE) 3G (UMTS 2100) 4G (WIMAX,LTE) WI-FI (IEEE 802.11b, g) and in other systems in the 1700-2700 MHz band. Electrical characteristics Operating frequency range, MHz 1700-2700 Gain in the GSM1800 range, dBi 17,5-18 3G gain (1.9-2.2 GHz), dBi18-19 WIFI gain (2.4 GHz), dBi19,5 4G (LTE) gain, dBi 19,5-20,0 Bottom width in the H-plane, deg 15-26 Bottom width in the E-plane, deg 15-26 Side lobe level, max -12 dB Cross polarization level, max -25 dB Input impedance, Ohms 75 SWR , max 1.6 Permissible power,10 W Polarisation vertical+ horizontal/ X-pol Mechanical characteristics Weight with mounting, g 2705 Bracing mast diameter 20-52 mm Overall dimensions without mounting, m 0,4 x 0,4 x 0,035 Connector 2 x F-female Material of the protective box Polycarbonate+ABS Antenna Material galvanized steel Mounting material steel Protective coating powdered polymer paint

,,,checcoanz,there is not much difference, post the antenna dimensions...!!! ,,,this it"s online Yagi Uda Antenna Calculator...??? https://www.changpuak.ch/electronics/yagi_uda_antenna_DL6WU.php

,,, what does NEMO mean ... ?? ,,,maybe MiMo(Multiple Input Multiple Output - multiple wireless connections technology)....!!!

,,,, it is observed that in the HFSS Software , Phi=0deg ; Theta=0deg...!!!

,,, after replacing the connector, place the ALFA AWUS1900 router next to the antenna....

I hope it is understood...!!!

1. Working frequency: 2.35-2.55GHZ 2. Antenna gain: 10.5dB (typical value) 3. Antenna standing wave ratio: <2 4. Power capacity: 10W 5. Mechanical size: 5×10Cm (without joint) 6. Radiation direction: directional linear polarization 7. Connector type: SMA-K (standard female head, external screw inner hole, customizable)

Harry36,try to put the pictures to be seen..!!!

Hentenna 2,1 GHz The original Hentenna as a special kind of a single loop was described first in the 1970ies by Japanese Hams, an English article by JF6DEA/KE1EO about the Antenna ("The Hentenna – The Japanese 'Miracle' Wire") was in the QST 1982 and in the ARRL-Antenna- Compendium, Vol. 5. The basic function of the Hentenna structure is the 1,50-λ-Extended-Quad. This antenna with the figure of an "Oblong" has a gain of 3,6 dBd, but a feedpoint impedance of 73 + j 470 Ω. The Hentenna has nearly the same gain, but a clever feeding with an impedance at XX of 50-70 +/- j 0 Ω . https://www.qsl.net/dk7zb/Quadlong/Hentenna.htm

,,,how to put a dimension on the drawing...

,,,it is a very good antenna but it should have a wider bandwidth for the 50 Ohm impedance...!!!!

,,,yes,it"s okay...!!! ,,,this is you...??