Register now to gain access to all of our features. Once registered and logged in, you will be able to contribute to this site by submitting your own content or replying to existing content. You'll be able to customize your profile, receive reputation points as a reward for submitting content, while also communicating with other members via your own private inbox, plus much more! This message will be removed once you have signed in.
-
Content count
118 -
Joined
-
Last visited
Posts posted by pragata.my.id
-
-
whether it can be applied to pcb?
-
-
1 hour ago, Admin said:,,, alternating current (AC) tidak sama dengan arus elektromagnetik (EMC) ... !!!
a/b/g/n/ac
-
so, not all AC signals are MiMo, is that right?
-
-
very simple, i like it..
-
-
-
Port1 horizontal
port2 vertical -
for nice vertical polarization in the upper chanel, and for nice horizontal polarization in the bottom chanel, is that right?
-
but great, can carry bandwidth of 20 Mbps at a distance of 4 km, with horizontal polarization, signal -65dbi to -70dbi depending on conditions in the field.
-
Tenda o3 is bad when set to vertical polarization antenna
-
sorry, I forgot to measure it, this device is installed, maybe 2 or 3 days I finish the data.
-
-
CPU Processor : Broadcom 300MHz
Antenna Beamwidth : Horizontal: 60° Vertical: 30°
Waterproof Level : IP64
Remote Web access : Support
Schedule Reboot : Support
Page Timeout : Support
Dyndns : noip, dyndns.org
Network Diagnoses : Ping, Traceroute, Signal Scan
Dimension : 270*94.86*67.5mm
Frequency : 2.4GHz
Maximum wireless speed : 150Mbps
Maximum Transmit Power : 800mw(29dbm)
Reception Sensitivity : MCS0: -88dbm
MCS7: -72dbmMaximum Concurrent Clients : 15
Interface : 1*FE PoE/WAN/LAN port
1*FE LAN Port
Grounding Terminal : 1*RST Button
3G Access
12dbi Directional AntennaMaximum Power Consumption : 6W
Lightning-proof : 4KV
LED : PWR,Bridge,LAN,WAN/LAN
Power Supply : PoE Injector (12v 1A,Cat5e or Better Ethernet Cable Length > 60 meters)Operating Mode
AP/Station/Universal Repeater/Repeater/P2MP/WISP/Router
Standard&Protocol
IEEE 802.11n/g/bFeatures
Enable/Disable Wireless Radio
SSID Hidden
Wireless Client isolation
Sensitivity Threshold
WMM Capable
APSD Capable
Wireless Access Control
Wireless Client listSecurity
64/128 WEP,WPA-PSK,WPA2-PSK,WPA&WPA2-PSK,WPA,WPA2
Transmit Power : Adjustable power by 1dBm
DHCP Server : Clients list
VPN Pass-through : PPTP,L2TP
Management ToolTime&Date Setting
System Log
Firmware update
Backup/Restore Configuration
Username ManagermentPackage Content
O3Power Adapter
PoE Injector
Ethernet cable
Quick Installation GuideTemperature
Operating Temperature:-20℃ ~ 55
Storage Temperature:-40℃ ~ 70℃Humidity
Operating Humidity:10%~90% non-condensing
Storage Humidity:10%~90% non-condensing4 people like this -
simple
-
means that the odd bait points on the edge?
-
as always, I have seen, the number of elements if not one, two, four, eight. only this time I see there are three, maybe there are also five or seven.
-
-
what is the result of impedance that is not good?
-
-
Tenda F3-16 Board v3.3
CPU1: Realtek RTL8196E
FLA1: 1 MiB (KH KH25L8006EM2I-12G)
RAM1: 8 MiB (ESMT M12L64164A-5T)
WI1 chip1: Realtek RTL8192ER
WI1 802dot11 protocols: bgn
WI1 MIMO config: 2x2:2
WI1 antenna connector: none
ETH chip1: Realtek RTL8196E
Switch: Realtek RTL8196E
LAN speed: 10/100
LAN ports: 3
WAN speed: 10/100
WAN ports: 1Default IP address: 192.168.0.1
Default login user: blank
Default login password: admin
Power: 9 VDC, 0.6 A -
-
no. i'am share it.
2 people like this
in Antennas for 2.4 GHz band
Posted
use copper wire?