Welcome to WIFI Antennas

Register now to gain access to all of our features. Once registered and logged in, you will be able to contribute to this site by submitting your own content or replying to existing content. You'll be able to customize your profile, receive reputation points as a reward for submitting content, while also communicating with other members via your own private inbox, plus much more! This message will be removed once you have signed in.

Sign In Sign Up

clanon

Members
 View profile  See their activity

  • Content count

    844

  • Joined

  • Last visited

Posts posted by clanon

  8. Posted

    9 minutes ago, papagayor said:

    Thank you my friend, I'm new on CST design but trying to learn by seeking online for help, also continue to design different models and simulate them for knowledge. I liked the Kathrein antenna design that is simple and very stable and trying to make a prototype at 3.5GHz center frequency and a bandwidth of 3.3-3.8 because that is the working 5G area in Greece

    ...find one working HERE or anywhere and SCALE DOWN-UP to 3.5ghz that's the easiest way...(You'll NEED the CST or 3d model)

  11. Posted

    when looking for Interference between solids , watch closely if you want to TRIM the first one (metal overlapping dielectric) or INSERT the Dielectric into the METAL that overlaps... TRIM or INSERT are the most useful commands before simulation...

    1 person likes this

  12. Posted

    On 5/29/2025 at 5:57 AM, Admin said:

    3. What is the reason for cutting the driven element? Why is it cut on one side or both sides, and why don't we use a full circular plate like the others?

        ,,,,, the marginal cut of the vibrator marks an elliptical polarization

    4. Why 30 degree? 

        ,,,,,for ellipticity

     

    Jomy maybe YOU can post an animation (GIF) of the ENERGY flowing through the driven Disk surface...(to see it turn...)

    1 person likes this

  17. Posted · Edited by clanon

    On 5/15/2025 at 11:03 AM, KSM said:

    Copper comes in different grades: M00, M0, M1, M2 and M3. The grade is determined by the purity of the copper content. M1p, M2p and M3p copper contain 0.01% oxygen and 0.04% phosphorus. Copper grades M1, M2 and M3 contain 0.05–0.08% oxygen.

    Brass might be better not so easy to oxidize...or protected from moisture PURE COPPER...(aluminum, zinc,etc)

    You'll have bigger losses on DIELECTRICS than metal every time

    1 person likes this

  19. Posted

    23 hours ago, devton said:

    20MHz width of channel for 5GHz - that is what can help to increase speed while connecting through building

    your choice of 40MHz width is good too...20 or 40 - one of this two will be best, other (wide) is not ok for this situation

     

    is WMM on\off making any difference?

    40mhz for SPEED (ideal conditions no loss of Packets or jumping signal strenghth) ,  20 for stability (bad conditions , reflections , etc on 2,4ghz tho 5.8ghz is a different beast)

  23. Posted · Edited by clanon

    what are the Huawei specs...model (that's HALF the network...) walls take at least 3db (depending in lots of factor Thickness materials metal is worse) the cpe has a lot of gain and needs a perfect alignment...but the router you are accesing needs to be free of metal obstacles on the LineOfSight...if possible otherwise you end up pointing to reflections and quality degrades a lot (passing vehicles cut MY connection sometimes Line of sight obstructed)

    1 person likes this