Welcome to WIFI Antennas
Register now to gain access to all of our features. Once registered and logged in, you will be able to contribute to this site by submitting your own content or replying to existing content. You'll be able to customize your profile, receive reputation points as a reward for submitting content, while also communicating with other members via your own private inbox, plus much more! This message will be removed once you have signed in.
Admin
Administrators-
Content count
5003 -
Joined
-
Last visited
Everything posted by Admin
-
The best material for the construction of the antennas is the sheet, thickness of 0.15-0.5mm This is from the sheet of aluminum tin cans boxes
-
A new form of biquad antenna
-
Optimization Techniques in CST Studio Suite,,, Optimize in CST.doc Optimize in CST.pdf
-
Something like that!
-
The dual polarized microstrip antenna was design to generate signals with +45 and -45 polarized but with a loss in directivity gain of about 3dBi This antenna is more interesting with symmetrical excitation at a resonant frequency
-
DELTA antenna, another kind of miniature antenna on PCB for 5.8GHz Anyway it's sub-miniature, about 30x30mm And here are the CSTfile thickness FR4 = 1mm DELTA 5,8GHz.cst
-
DELTA antenna, another kind of miniature antenna on PCB for 5.8GHz
-
This is a 1.2GHz antenna version with pseudo-elliptical polarization
-
,,,a simple sloted patch antenna for 5,8MHz dimensions = 4,5x45x45mm constructive details on feed point,use this type of connector
-
I think this type of antenna is better Double plated PCB
-
I am going to try to do a simulation, it might be that the ellipse has other dimensions for this antenna What thickness of PCB did you choose?
-
for 1.3GHz it is recommended to use elliptical cut
-
"And these are the latest results
-
-
For this, I have to resume the simulation, this project is old for a few years
-
You could say it's a new form of the antenna gain in a reasonable direction ...
-
then multiplies the dimensions of the image with k = 1,0345 for the frequency of 5,8ghz
-
But biquad2.igs file is for 1.5mm FR4 thickness,,,,!!!!!
-
What frequency do you want?
-
Ant_kid, are you interested in antennas for drones?
-
... yes. can adjust the impedance or something like that,,,,
-
the uplink and dowlink it should be roughly the same...
-
which antenna?
-
What dimensions did you use for FR4 thick 1mm ,,, ??? I have not posted such dimensions....!!!
-
,,,if CP is Circular Polarisation,,,,YES...!!!!
