Register now to gain access to all of our features. Once registered and logged in, you will be able to contribute to this site by submitting your own content or replying to existing content. You'll be able to customize your profile, receive reputation points as a reward for submitting content, while also communicating with other members via your own private inbox, plus much more! This message will be removed once you have signed in.
-
Content count
4451 -
Joined
-
Last visited
Posts posted by Admin
-
-
Petra-10 MIMO 4x4-Universal compact panel antenna for 4G / 5G modems and routers that support MIMO 4x4 technology. F=1700-5000MHz, CU=7-12dBi, connectors 4 x N-female, X-pol, decoupling between channels of more than 20dB.
The PETRA-10 MIMO 4x4 panel antenna is designed for use in a set of equipment for 4G (B1, B3, B7, B38, B40) and 5G (N77, N79, N78) wireless data transmission systems at frequencies of 1700-5000 MHz.
This antenna is compatible with MIMO 4x4 equipment, as it has four connectors for connecting to the equipment. You can also connect two modems with MIMO 2x2 technology to the antenna for redundancy/summation of communication channels.
Advantages of the PETRA-10 MIMO 4x4 antenna :The wide band of the antenna allows you to work in all current and future fastest cellular communication bands
Full support for MIMO 4x4 technology.
Active emitters are reliably protected from precipitation by a housing made of UV-resistant plastic and have an extended service life
The antenna inputs are short-circuited by direct current between the external and internal conductors, which reduces the probability of static electricity accumulation at the modem input and makes the use of a lightning arrester optional (with a small length of the connecting feeder between the modem and the antenna).
Electrical characteristics
Operating frequency range, MHz 1700÷5000
Gain factor, dBi 7.0÷11.5
Bottom width in the H-plane, deg 47÷73
Bottom width in the E-plane, deg 46÷72
Side lobe level, max -12 dB
Decoupling between ports in the operating range, not less than 23 dB
Input impedance, Ohms 50
SWR in the operating frequency range at the inputs, max. 1.8
Permissible power, W 10
Slope of polarization of received / emitted waves -45°/+45°(X-pol) or 0° / 90°(V/H)
Mechanical characteristics
Antenna weight, g 1185
Mounting on a pipe with a diameter of, mm 30-52
Operating temperature range -60°C to +80°C
Overall dimensions without mounting, m 0, 2x0, 2x0, 08
Permissible wind speed, m / sec 25
Connectors 4 x N-fe male
Material of the protective cover- Polycarbonate
Antenna and mount material -Steel, Galvanized steel, Brass
-
,,,a Bester antenna with other dimensions...
,,,and the practical realization of Egor- Free Wardriving...
-
-
-
DavidER,,why don't you look at this post on page 3...!!!
-
-
,,,man, such a thing is not possible...!!!
-
2,4---2,7 GHz it"s not a limited band>>>!!!
-
-
-
,,,yes, it is possible, but the isolation between the two ports is not good, so two antennas with different polarizations(Horizontally+
Vertical) would be preferable...!!! -
-
-
,,,you show how the antenna should be and for what frequencies??!!
-
-
The Yagi antenna needs to be very well adjusted between the two points. A patch antenna solves this with almost the same gain as a yagi. I prefer the flat one.
,,,, as a material, galvanized sheet is indicated for the reflector and vibrator, and aluminum sheet can be used for directors...!!!
,,,,what frequency are you interested in...??/
-
14dBi 2.4GHz EZ-Go-214 MiMo Panel-Enclosure Antenna
The EZ-Go-Panel2 MIMO panel antenna offered by e-zy.net is a 2.4GHz 14dBi gain Dual polarity antenna that is developed to allow integration of the customers’ radio equipment inside the weatherproof compartment.
Is a cost efficient weatherproof enclosure with integrated high efficiency antenna and accommodations for customer mounting of electronics.The housing is UV resistant and UL rated with a nice aesthetic appearance and clean lines.
With the included Ez-Snap stand-off kit PCB mounting systems, radio boards can be mounted without the need to drill any holes.
The corrosion resistant tilt bracket system accommodates pole or wall mounting.
The antennas pigtail connectors are UFL / IPEX
1 person likes this -
-
-
-
,,,yes, the vibrating element must be oriented at 30 degrees, galvanized sheet can be used...!!!
-
-
-
in Antennas for mobile communications
Posted