Register now to gain access to all of our features. Once registered and logged in, you will be able to contribute to this site by submitting your own content or replying to existing content. You'll be able to customize your profile, receive reputation points as a reward for submitting content, while also communicating with other members via your own private inbox, plus much more! This message will be removed once you have signed in.
Admin
Administrators-
Content count
5054 -
Joined
-
Last visited
Posts posted by Admin
-
-
On 9/16/2023 at 7:01 PM, jbckdsav said:Must be at least 800-2700+ to cover full band of 4G !!!
,,, yes, it could be that way(two in one)...!!!
1 person likes this -
,,,man, such a thing is not possible...!!!
-
2,4---2,7 GHz it"s not a limited band>>>!!!
-
,,,a Bester for an Offset...
-
-
,,,yes, it is possible, but the isolation between the two ports is not good, so two antennas with different polarizations(Horizontally+
Vertical) would be preferable...!!! -
-
,,,papus... if the antenna is out in the rain, you have to protect the antenna with a plastic case...
,,,or so...
2 people like this -
,,,you show how the antenna should be and for what frequencies??!!
-
Petra 20 other sizes, other frequency,,,
6 people like this -
The Yagi antenna needs to be very well adjusted between the two points. A patch antenna solves this with almost the same gain as a yagi. I prefer the flat one.
,,,, as a material, galvanized sheet is indicated for the reflector and vibrator, and aluminum sheet can be used for directors...!!!
,,,,what frequency are you interested in...??/
-
14dBi 2.4GHz EZ-Go-214 MiMo Panel-Enclosure Antenna
The EZ-Go-Panel2 MIMO panel antenna offered by e-zy.net is a 2.4GHz 14dBi gain Dual polarity antenna that is developed to allow integration of the customers’ radio equipment inside the weatherproof compartment.
Is a cost efficient weatherproof enclosure with integrated high efficiency antenna and accommodations for customer mounting of electronics.The housing is UV resistant and UL rated with a nice aesthetic appearance and clean lines.
With the included Ez-Snap stand-off kit PCB mounting systems, radio boards can be mounted without the need to drill any holes.
The corrosion resistant tilt bracket system accommodates pole or wall mounting.
The antennas pigtail connectors are UFL / IPEX
1 person likes this -
-
-
,,,something like that with several rings...
1 person likes this -
,,,yes, the vibrating element must be oriented at 30 degrees, galvanized sheet can be used...!!!
-
,,,this Bester antenna is for 2.4GHz...(to which you can add directors)....!!!!
-
-
-
-
Waveguide Corrugated Horn Antenna......can you give dimensions?
-
,,,another video...
-
This dual band antenna is designed and made by RSRF. According to the datasheet, it operates between the frequency ranges of 600 to 960MHz and 1690 to 2700MHz with a modest gain of 6dBi and 9dBi respectively. These frequency bands pretty much covers all the cellular frequencies used for 3G and 4G LTE in North America. You can also use this antenna for low-band and mid-band 5G applications. As the low-band 5G lies between 600-850MHz and the mid-band 5G is between 2.5-3.7 GHz. Although this antenna only covers a small portion of the mid-band 5G frequency range.
-
,,,but with MiMo,isolation between ports...
1 person likes this
in Antennas for mobile communications
Posted
DavidER,,why don't you look at this post on page 3...!!!