Admin

I do not understand you, you get a new laptop and you want to stay on CST2014 ... ???

,,,yes...!!! ,,,but try to install cst2020...!!!

,,,does not matter...!!!

,,, to the center, where else ... !!! ???

,,,the wings are inclined by 17-19 degrees ... ??? ,,,,it has to work...!!!

"I like it, the construction looks very nice...!!! ,,, okay, but I see that you have also put wings, let's see how it behaves ..!!! ,,,,what is the width of the wings ... ??

,,,and the simplified batwing variant...

MikroTik SXT LTE6 kit... it"s 802.3af/at compliant Details 2G Category Class12 3G Category R7 (21Mbps Downlinks, 5.76Mbps Uplink) / R8 (42.2Mbps Downlink, 5.76Mbps Uplink) LTE Category6 (300Mbit/s Downlink, 50Mbit/s Uplink) LTE FDD bands 1 (2100MHz) / 2 (1900MHz) / 3 (1800MHz) / 7 (2600MHz) / 8 (900 MHz) / 20 (800MHz) / 5 (850MHz) / 12 (700MHz) / 17 (700MHz) / 25 (1900MHz) / 26 (850MHz) LTE TDD bands38 (2600MHz) / 40 (2300MHz) / 39 (1900MHz) / 41n (2500MHz) 2G bands 2 (1900MHz) / 3 (1800MHz) / 5 (850MHz) / 8 (900MHz) 3G bands 1 (2100MHz) / 2 (1900MHz) / 5 (850MHz) / 8 (900MHz)

I'm curious, what the results are ... !!!???

NEW PICTURES WITH DETAILS OF THE ANTENNA from Yurik82 user...

,,,, oh, sorry, the dimensions of the reflector 1x220x220mm...!!! ,,,if you want you can put side walls inclined at 17-19 degrees and width of 50mm ...!!!

,,,,for Christmas,a UWB variant for a user friend sa3500...

,,,on YouTube...

Panel antenna AGATA-2F 2x2 MIMO is intended for use in complete equipment of wireless data transmission systems standards: 2G(EDGE, GPRS frequencies GSM1800) 3G (UMTS 2100) 4G (WIMAX,LTE1800, LTE2600) WI-FI (IEEE 802.11 b, g, n) in other systems the range of 1700-2700 MHz. AGATA-2F MIMO 2x2 antenna is highly directional and ideal for use in communication systems "point to point" and "point-multipoint". Antenna is a structure of two spaced in-phase polarization gratings and made more compact compared to popular AGATA F antenna MIMO 2x2. For antenna connection with the router applies cable TV with 75 Ohm. Operating frequency range, MHz 1700-2700 Gain (1.7 to 2.2 GHz), dBi 15-16 The gain in range of WIFI (2.4 GHz), dBi 17 The gain in the range of 4G (LTE2600), dBi 17-18 Width of DN in the horizontal plane, deg 31-49 Days width, in vertical plane, deg 15-24 The sidelobe level is not more -12 dB Input impedance, Ohm 75 SWR in the frequency range, not more 1.6 Isolation between ports, dB > 25 Permissible power watts 10 Polarization -vertical/horizontal Mechanical characteristics Mount -mast diameter 20-52mm Weight 2,1 Overall dimensions without mounting, 0,41х0,24x0. 06m Allowable wind speed, m/sec 20 Connector 2 x F-female Material of protective box Polycarbonate + ABS Antenna material galvanized steel, steel Protective coating powder polymeric paint

I think the antenna is correctly built but only the connection socket is not OK. Better to return the product...!!! ", that's how it should look ...

,,, if you can give me these dimensions ... !!!

No, I would like all the dimensions for the whole antenna..!!

,,,you can give the dimensions of this omni antenna...??? ,,,for which the frequency works..???

"I don't think so, but you can get in touch with the sales department here....https://antex-e.ru/feedback/

The feed offset parabolic antenna KIP9-1700/2700DP MIMO 2x2 is designed for use with 3G/4G/WiFi modems and routers. The radiator supports standards LTE1800, UMTS2100, LTE2600 and WiFi(2.4 GHz) 802.11 b/g/PS 2x2 MIMO in the frequency range of 1700-2700 MHz. If you have a 4G modem, and Internet speed and signal strength are not satisfied, then the use of bundles 4G irradiator plate surely will boost the signal. Because of MIMO standard doubles the bandwidth of the channel. Amplification up to 35 dB. and inside...

,,, so, do you want ... ??

,,, and what the antenna looks like inside.... ,,, for other details, see this post...