Welcome to WIFI Antennas
Register now to gain access to all of our features. Once registered and logged in, you will be able to contribute to this site by submitting your own content or replying to existing content. You'll be able to customize your profile, receive reputation points as a reward for submitting content, while also communicating with other members via your own private inbox, plus much more! This message will be removed once you have signed in.
Admin
Administrators-
Content count
4989 -
Joined
-
Last visited
Everything posted by Admin
-
,,, in fact , the antenna dimensions are for the frequency of 2600 MHz...!!! https://antex-e.ru/store/36907/39025/?pos=914828
-
,,,and this...
-
-
Antenna KATHREIN production are not only exceptional electrical characteristics. Special attention is paid to the mechanical characteristics of the antennas.
-
,,, or maybe you want a Bester antenna ... ??? !!!
-
,,,andrew mcneil has fakes often...!!!!
-
,,, you don't have to add any parasitic director anymore, you have to cut out of the reflector to be able to be mounted on the offset dish...
-
,,, if you want to change the impedance is easy, displaying the VSWR is from the program...!!!!
-
,,, another way of construction...
-
Harry you can also give the dimensions ...???
-
I use "cst" program but it is also good "hfss".
-
Yes, Harry, you're right, I'm in a hurry, I'll correct the dimensions...!!
-
,,, yes, the foam is dielectric and the dimensions are in millimeters...!!!
-
,,, these are the promised dimensions ... !!!
-
-
,, try to open your huawei E1756 modem to see where the inside antenna is...!!!
-
,,, maybe tomorrow I will give you the details of this antenna...
-
,,, for MiMo, you need another type of antenna...!!! ,,, aaa, well if you have huawei E1756 modem ... why don't you put him in the focus of offset dish??
-
,,, the distance is not great and the trees do not have such a great influence ....!!!
-
,,, for offset dish, I think this is better...
-
,, welcome, but on this site you did not find anything useful to you...!!!???
-
The Nitsa-7 PCB omni-directional printed antenna is designed to connect to 3G/4G/WiFirouters and modems that do not have built-in antennas. The antenna is equipped with a 20 cm long thin flexible cable with a U. fl connector installed. It is recommended for gluing with double-sided adhesive tape on the inner surfaces of plastic cases. Electrical Characteristics of NITSA-7 PCB Operating frequency range, MHz 800-960/1700-2700 Gain factor, dBi 2-5 Bottom width in the horizontal plane, deg 360 Bottom width in vertical plane, deg up to 80 Input impedance, Ohms 50 SWR in the operating frequency range, max. 2.4 Permissible power, W 2 Polarisation linear Mechanical characteristics Weight, g 50 Overall dimensions without cable, mm 119x40x0. 5 Cable length, mm 200 Connector U.fl
-
,,, it is still possible ... !!!
-
d=185mm;D=278mm;H=262mm
-
...it is not crimping, it is soldering by tinning...!!!
