Welcome to WIFI Antennas
Register now to gain access to all of our features. Once registered and logged in, you will be able to contribute to this site by submitting your own content or replying to existing content. You'll be able to customize your profile, receive reputation points as a reward for submitting content, while also communicating with other members via your own private inbox, plus much more! This message will be removed once you have signed in.
Admin
Administrators-
Content count
4444 -
Joined
-
Last visited
Everything posted by Admin
-
Explanation of antenna choice for small UAV (Unmanned Aerial Vehicle) and its realization are presented. The suggested antenna has a simple construction with low weight and small size. It is operating in 2.4 GHz band. Radiation pattern is toroidal that allows to have a stabilized link at all directions to aircraft. Antenna is short-circuited for protecting from electrostatic discharge. by Nikita M. Boev Siberian Federal University
-
Antenna calculation,,https://antenna-dvb-t2.info/
-
For a good antenna VSWR should be <1.2
-
Yes, they are good, but you must have a Male-Female They are good so (NP245-n-st)
-
TE Connectivity 50 Ohm Straight Panel Mount N Type Connector, jack, Solder Termination, 0 to 11GHz
-
Should be tried,,,on PCB,,,
-
I would be interested in adapting the impedance, you put some dimensions if you can,..!!! Inside,corrugated cardboard , helps concentrate the electromagnetic wave as a dielectric lens,I think...!!!!
-
Practice Valet ....
-
Another achievement of Vman...
-
Maybe you're right...!!!
-
See how it works.... ERKIN3.dxf
-
All patches are square, as seen in the picture...!!!
-
Is not the good antenna ,,,with directors... ,,,without directors..
-
Ok, Erkin, I will resume simulating this antenna for you
-
for HDTv
-
on PCB
-
on 3G
-
And a practical realization of the antenna...
-
For the impedance adaptation (300 Ohm> 50 Ohm or 75 Ohm) the following variants can be used: on PCB #1,5mm
-
what?this? or this...??
-
-
Erkin, why do not you try with insulating spacers from the motherboard of PC...
-
to try...!!1
-
I like your avatar...
-
It's not ridiculous, it's really good, and so ... tell me the results...!!!! But tell me why the question marks...???????????????????, appear in the first picture
