Register now to gain access to all of our features. Once registered and logged in, you will be able to contribute to this site by submitting your own content or replying to existing content. You'll be able to customize your profile, receive reputation points as a reward for submitting content, while also communicating with other members via your own private inbox, plus much more! This message will be removed once you have signed in.
Filos92
Members-
Content count
28 -
Joined
-
Last visited
Posts posted by Filos92
-
-
I am very limited with dimensons of the Waveguide.
The inner and outer conductor can be changed but the other sizes are fixed.
It's my goal to simulate first the normal waveguide and than the calibration standards (thru load and short)
But at first I would be realy happy if only the simulation starts
Thank you so much for your help!
-
Hey there,
I'm new at this Forum and i hope i opened this Topic in the right Thread, so I am sorry if this is not the case.
I've tried to Simulate different kind of Waveguides (Coplanar, Stripline etc) with CST MICROWAVE STUDIO.
since i changed from version 2015 to 2017 the Simulation won't start anymore.
It give me a Critical Error called: "Adaptive port meshing failed".
The ports are calculated with the port macro for Waveguides.
I hope some can help me.
Thanks in advance,
Greetings,
Filos
in Modeling antennas
Posted
should'nt the second port be turned by 180 degrees?
I've tried to setup the Waveguide your way (with my values) but I still got the same error message.
Maybe the CAD model is to small?