BatWing antenna 2.4 ghz

[Hamza 43]

It's true this antenna could cover  800 to 2700 ?

 

[Hamza 43]

On 15/02/2020 at 3:31 PM, Admin said:

,,, and finally, the latest UWB batwing  antenna model is optimized...!!!

 

 

 

It's dielectric support or metallic support?

[Admin 2421]

,,,metal, M3 screw...!!!!

[Hamza 43]

5 hours ago, Admin said:

,,,metal, M3 screw...!!!!

thanks jomy  .how  could i pass the  coax cable  ?

[Admin 2421]

,,, something like that ... 

 for cross polarization...

 

[Hamza 43]

Thanks jomy  j'ai tout compris

[muhomor 0]

On 15.02.2020 at 5:31 PM, Admin said:

,,, and finally, the latest UWB batwing  antenna model is optimized...!!!

 

 

 

Hi
One question - what about distance between the centers of batwings and reflector size for MIMO?

And 50 or 75 Om cable?

TNX!:)

 

 

[Admin 2421]

 ,,, coaxial cable with 50 Ohm impedance and a box with the dimensions below for MiMo Batwing antennas...

[Admin 2421]

 ,,, an improvement of the Batwing antenna with dielectric lens...

[Admin 2421]

,,, where do you see insulators at the wings of the box ... ???

[mr.ab 0]

are these metal elements?

[Admin 2421]

,,, of course, you can't see ... !!! ???

[mr.ab 0]

Ok! Thank you! 

[Hamza 43]

3 hours ago, mr.ab said:

are these metal elements?

JOMY how  about the isolation (coupling) of 2 ports  in this  mimo antenna ? IS it good ?

[Admin 2421]

 I think this connection between ports is not the right one....!!!

 

[Admin 2421]

,,, a simple Batwing antenna made of thin sheet recovered from cans...!!!

 

 

,,,the *cst file...Pathe Batwing.cst

[yeam 7]

On 7/30/2020 at 8:26 PM, Sl4va said:

Made the first prototype

 

  Hide contents

 

 

 

Anyone had tested this SWR and gain? Thinking to make a dual polarized Bester feed out of this.

Edited January 25, 2021 by yeam

[Admin 2421]

,,, a variant of cross polarization....

 

[Sl4va 11]

If you make it in a "bucket"? Will the gain be added?

[Admin 2421]

9 hours ago, Sl4va said:

If you make it in a "bucket"? Will the gain be added?

,,,which one of them...???

[Admin 2421]

,,,with a bucket of 10 liters...

[Admin 2421]

,, a simple improvement of the antenna..!!

,,, a wider impedance adaptation band is obtained .. !!

,,,design...

[remio 1]

 

Hi, what would happen to the antenna at batwing 2.4 if the size of the reflector make 78h130mm ?

I would like to insert 5.8 and 2.4 antennas into one case .

 

 

[clanon 215]

they INTERACT for the WORSE ! without simulation ...hard to know...

[remio 1]

If the Batwing emits horizontally polarized radiation in the horizontal plane, then how to position the antenna vertically or horizontally with the slit, if it is transmitting, and there is a dipole at the reception, which is now vertical, can the receiving dipole be placed horizontally more correctly?