Welcome to WIFI Antennas

Register now to gain access to all of our features. Once registered and logged in, you will be able to contribute to this site by submitting your own content or replying to existing content. You'll be able to customize your profile, receive reputation points as a reward for submitting content, while also communicating with other members via your own private inbox, plus much more! This message will be removed once you have signed in.

sa3500

6 Еlement loop antenna

The antenna design is shown in the figure, dimensions - in the table. For manufacturing, you can use a wire made of copper or brass with a diameter of 3 ... 5 mm. The wire is successively bent according to the shape shown in the figure, the joints are soldered. For greater structural strength before soldering joints can be tied down with thin copper wire.

LINA6v06oO.jpg

Antenna cable is soldered at points "A" and "B". At point “C”, the cable sheath is connected to the antenna material.

udp26xee4q.jpg

27WcWdOtUq.jpg

n1bdR23L5i.jpg

The antenna showed good results

2 people like this

Share this post


Link to post
Share on other sites

,,, the excellent realization ...!!1

,,,on which channels did you built this antenna...???

1 person likes this

Share this post


Link to post
Share on other sites

,,, if you want, I can make a simulation for this antenna ... !!!

Share this post


Link to post
Share on other sites

Jomy I'm not strong in graphics, but it works perfectly

(Base from me for 50 km)

Edited by sa3500

Share this post


Link to post
Share on other sites

,,, it does not matter, I would like to know the gain of the antenna ... !!!

Share this post


Link to post
Share on other sites

,,, it can also be done ...

 

1 person likes this

Share this post


Link to post
Share on other sites

,,,for your antenna about these are the results ... ???
,,, the frequency band does not match and the impedance is not good...!!!

,,,also, the gain in directivity is small...!!!

screenshot_30.png

Share this post


Link to post
Share on other sites

I do not know .... Perhaps there are errors in the antenna circuit.
I am interested in work. She works. Made 3 people - satisfied

 :) 

Edited by sa3500

Share this post


Link to post
Share on other sites

,,, which TV channels are you working on...!!!

,,, simulation of specific program antennas can never fail...!!!

Share this post


Link to post
Share on other sites

 Ukraine, base in Kharkov

distance to the base 50-60 km

 

554 МГц | channel number 31
channels: Интер, ТРК «Украина», 1+1, НТН, К1, Первый Национальный, ICTV, Enter-Фильм

Частота 586 МГц | channel number 35
channels: Zoom, Киноточка, СТБ, ТЕТ, К2, Новый канал, М1, 5-Канал

Частота 690 МГц | channel number 48
channels: Mega, Pixel, XSport, НЛО-ТВ, 2+2, Dobro, Tonis, BUSINESS

Частота 770 МГц | channel number 54
channels: Винтаж, Эскулап ТБ, ОТБ, Новый формат, Тонис-центр

I accept everything. 

770 MHz - slightly weaker than the rest

Edited by sa3500

Share this post


Link to post
Share on other sites

",,,anyway the dimensions of your antenna (ch41-ch49) are not suitable for your Tv channels...!!!

screenshot_24.png

,,, why do not you want to try a kind of this antenna ... ??

 

screenshot19.png

Share this post


Link to post
Share on other sites

(Official document of the Kharkiv region)
Below is a list of existing digital television channels for our region as of July 2014.

W4JJFM667x.jpg

89P30T5FWb.jpg

Mi0I93JcPn.jpg

Share this post


Link to post
Share on other sites

,,,, anyway, your antenna is not really good ... !!!!

,,,so it must look like a true quad antenna with 11dBi...!!!

1183.jpg.jpg

Share this post


Link to post
Share on other sites

,, our friend sa3500, built this fake antenna...
 

129.jpg

130.jpg

131.jpg

132.jpg

 

I recommend this broadband antenna...

screenshot_133.jpg

screenshot_135.jpg

screenshot_137.jpg

5 people like this

Share this post


Link to post
Share on other sites
5 hours ago, Ingsun said:

Is this antenna allows for 4G LTE 900 MHz network

,,,yes ,it is for 650---950 MHz...!!!

Share this post


Link to post
Share on other sites

In the area I was hard to find coaxial 50 ohm, can this in replace coalial 75 ohm

Share this post


Link to post
Share on other sites
3 hours ago, Ingsun said:

In the area I was hard to find coaxial 50 ohm, can this in replace coalial 75 ohm

,,,,yes, of course, but some dimensions have to be modified...!!!!

,,,, and I think you're right, a 75 ohm coaxial cable should be used and I think I'll make a simulation for this impedance ...!!!

Share this post


Link to post
Share on other sites
On 14/2/2019 at 10:36 AM, Admin said:

 

I recommend this broadband antenna...

screenshot_133.jpg

screenshot_135.jpg

 

HI mate. Do you have this model in CST? It is awesome! I would like to try to make it with Circular Pol. Thanks

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!


Register a new account

Sign in

Already have an account? Sign in here.


Sign In Now