Welcome to WIFI Antennas

Register now to gain access to all of our features. Once registered and logged in, you will be able to contribute to this site by submitting your own content or replying to existing content. You'll be able to customize your profile, receive reputation points as a reward for submitting content, while also communicating with other members via your own private inbox, plus much more! This message will be removed once you have signed in.

pragata.my.id

Tenda O3

CPU Processor  :  Broadcom 300MHz
Antenna Beamwidth  :  Horizontal: 60° Vertical: 30°
Waterproof Level  :  IP64
Remote Web access  :  Support
Schedule Reboot  : Support
Page Timeout : Support
Dyndns  :  noip, dyndns.org
Network Diagnoses  :  Ping, Traceroute, Signal Scan
Dimension  : 270*94.86*67.5mm
Frequency  :  2.4GHz
Maximum wireless speed  :  150Mbps
Maximum Transmit Power  :  800mw(29dbm)
Reception Sensitivity :  MCS0: -88dbm
                                 MCS7: -72dbm

Maximum Concurrent Clients  :  15
Interface  :  1*FE PoE/WAN/LAN port
                  1*FE LAN Port
Grounding Terminal  :  1*RST Button
3G Access
12dbi Directional Antenna

Maximum Power Consumption  :  6W
Lightning-proof  :  4KV
LED  :  PWR,Bridge,LAN,WAN/LAN
Power Supply  :  PoE Injector (12v 1A,Cat5e or Better Ethernet Cable Length > 60 meters)

Operating Mode

AP/Station/Universal Repeater/Repeater/P2MP/WISP/Router
Standard&Protocol
IEEE 802.11n/g/b

Features

Enable/Disable Wireless Radio
SSID Hidden
Wireless Client isolation
Sensitivity Threshold
WMM Capable
APSD Capable
Wireless Access Control
Wireless Client list

Security

64/128 WEP,WPA-PSK,WPA2-PSK,WPA&WPA2-PSK,WPA,WPA2

Transmit Power  :  Adjustable power by 1dBm
DHCP Server  :  Clients list
VPN Pass-through  :  PPTP,L2TP

Management Tool

Time&Date Setting
System Log
Firmware update
Backup/Restore Configuration
Username Managerment

Package Content

O3Power Adapter
PoE Injector
Ethernet cable
Quick Installation Guide

Temperature

Operating Temperature:-20℃ ~ 55
Storage Temperature:-40℃ ~ 70℃

Humidity

Operating Humidity:10%~90% non-condensing
Storage Humidity:10%~90% non-condensing

Default Settings

IP Address: 192.168.2.1
Login Username:admin
Login Password:admin

Certification  :  FCC/CE/RoHS

Tenda-O3-4.png

Tenda-O3-3.png

Tenda-O3-1.jpg

Tenda-O3-2.jpg

4 people like this

Share this post


Link to post
Share on other sites

"Thanks Pragata, but some dimensions are needed at the adaptation lines...!!!!

and the distance between the patches...!!!

Share this post


Link to post
Share on other sites

sorry, I forgot to measure it, this device is installed, maybe 2 or 3 days I finish the data.

Share this post


Link to post
Share on other sites

but great, can carry bandwidth of 20 Mbps at a distance of 4 km, with horizontal polarization, signal -65dbi to -70dbi depending on conditions in the field.

Share this post


Link to post
Share on other sites

okay and these are the results of my simulation with approximate dimensions...

cocaporn_01-tile.thumb.jpg.e927065254898f0c6c3e14f4ae1ef98d.jpg

2 people like this

Share this post


Link to post
Share on other sites

for nice vertical polarization in the upper chanel, and for nice horizontal polarization in the bottom chanel, is that right?

Share this post


Link to post
Share on other sites

Antenna Beamwidth  :  Horizontal: 60° Vertical: 30°

Share this post


Link to post
Share on other sites

hi all ... tenda o3 or ubnt nanostation loco M2. which is best as access point? loco M2 have 32mb ram but there is no data about tenda o3.

Share this post


Link to post
Share on other sites

Tenda03----Antenna =12dbi

 ubnt nanostation loco M2 .... AntennaBuilt-in, 2x2 MIMO with dual polarization, gain of 7.4  to 8.2 dBi

1 person likes this

Share this post


Link to post
Share on other sites
On 1/31/2018 at 10:01 PM, Admin said:

okay and these are the results of my simulation with approximate dimensions...

cocaporn_01-tile.thumb.jpg.e927065254898f0c6c3e14f4ae1ef98d.jpg

Try adding reflector like the original design?

Share this post


Link to post
Share on other sites

,,, this simulation is almost like the original ... !!!

Share this post


Link to post
Share on other sites
On 2/1/2018 at 2:15 AM, Admin said:

21.jpg

can I get dimensional details of this model sir? thanks

Share this post


Link to post
Share on other sites
1 hour ago, BurgHammer said:

Measurements are in the first post.

Well, it kind of not enough.

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!


Register a new account

Sign in

Already have an account? Sign in here.


Sign In Now