Welcome to WIFI Antennas

Register now to gain access to all of our features. Once registered and logged in, you will be able to contribute to this site by submitting your own content or replying to existing content. You'll be able to customize your profile, receive reputation points as a reward for submitting content, while also communicating with other members via your own private inbox, plus much more! This message will be removed once you have signed in.

lrg

Mona Unibox PRO

Panel antenna MONA Unibox PRO with sealed box 3G/4G USB modem is the ready solution for signal amplification LTE800/GSM900/GSM1800/UMTS900/UMTS2100/WIFI2400/LTE2600.

 

   Electrical characteristics

Operating frequency range, MHz790÷960/1700÷2700

Gain, dBi 8÷9/10÷15

Width of DN in the horizontal plane, deg 27÷68

Days width, in vertical plane, deg 26÷68

The ratio of forward/back, dB13÷20

The sidelobe level, dB<-13

Input impedance, Ohm50

SWR in the frequency range, not more1,8

Permissible power watts10

Polarization vertical+horizontal or X-pol

    Mechanical characteristics

Weight with mount, g 2300

Overall dimensions, m 0,3x0,3x0,165

Internal dimensions sealed box, mm not less than 210x160x65Connectors

2 x SMA-male, USB, SIM

Mthe material of the antennasteel, galvanized steel

Material of protective box ABS+polycarbonate

Working temperatures IP67

Снимок экрана (17).png

Снимок экрана (18).png

Снимок экрана (19).png

Снимок экрана (20).png

Снимок экрана (21).png

Снимок экрана (22).png

Снимок экрана (11).png

Снимок экрана (12).png

Снимок экрана (13).png

Снимок экрана (14).png

Снимок экрана (15).png

Снимок экрана (16).png

Mona_Unibox_Pro.pdf

2 people like this

Share this post


Link to post
Share on other sites

"Irg, very interesting this antenna, do you have something like that or these images are taken from youtube ???

,,,,from here...???

 

Share this post


Link to post
Share on other sites

Advantages:

Antenna works with all LTE, 3G, 2G

The possibility of an emergency replacement SIM card operator 

The inner space of the box allows you to accommodate any active equipment (modems, routers)

Low path loss from the antenna to the modem

The antenna is suitable for installation on the facades of buildings

Active emitter antenna covered in a plastic case

Roomy sealed box provides protection for the modem or connection "modem+router" from moisture according to IP65

Plastic shell of the antenna is protected from UV exposure and has an extended lifespan.

The antenna has a modern design

 

1.jpg

2.jpg

Share this post


Link to post
Share on other sites

Да, из этого видео

Yes, from this video

 

Share this post


Link to post
Share on other sites

I show you a Guanella 1:1 balun with high choking impedance for most antennas over voltage baluns and 4:1 current baluns,used to adapt the impedance to the antenna above...

 

152.jpg

437.jpg

Share this post


Link to post
Share on other sites

,,,and a simulation with only two patches...

10.jpg

11.jpg

,,, with dimensions of transmission line balun Guanella ...

12.jpg

13.jpg

4 people like this

Share this post


Link to post
Share on other sites

,,,if Guanella adaptation is correct, it can be even better...

screenshot_946.png

2 people like this

Share this post


Link to post
Share on other sites

MONA-2 MIMO BOX

Universal remote antenna with the ability to accommodate any modem, router and convenient change of SIM card. Frequency 790-960/1700-2700 MHz. CU=7.5-10 dBi + Box. 2xSMA-male connector. It is recommended for use at distances up to 5 km from the BS. Support for aggregation of all frequencies

 

4_c_nadpisyu_2.jpg

mona_box_6.jpg

mona_box_8.jpg

mona_box_77.jpg

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!


Register a new account

Sign in

Already have an account? Sign in here.


Sign In Now