mitiche

will it  be better if so please give me the dimensions for band 40 

i want to try it 

so i got this 

can i use it with the antennas ? 

2 hours ago, Admin said:

PS, MITICHE, I WOULD LIKE TO ASK YOU HOW DO YOU POST THE IMAGE ON THIS FORUM...???

i did like so but i got the same result 84 Dbm 

ahh okay so the feeds should be placed like this okay ill do it now and see the difference 

6 hours ago, Admin said:

,,,this is how the two antennas should be connected at 90 degrees polarization...

what do you mean should i reposition the antennas to 90% one horizontal and one vertical or the feeds of the antennas ? 

On 10/01/2026 at 0:35 PM, Admin said:

mitiche...try this,,,,

hello sir it's been a while i  was busy with allot of things so yesterday i got som time and i made 2 of this model 

the dbi got from 101 to 84

i isolated tge V plate and I had some trouble fixing the iron wire to the aluminium plate

but im happy with the result 

so next time ill make the V plate with copper plate 

thanks again for your kindness 

okay sir im getting Busy this week ill try this next week thank you for your help 

 the connector i used is from a tv receiver

and  about the soldering it didn't stick to the aluminium so i solder the cable from both ends ands 

should i use another metal for this ? 

and what about the dimensions i found out that my region is using a 40 band 2300 Mhz 

should i cut it to be like the first model?   

22 hours ago, clanon said:

make sure there's GOOD electric contact between inner wire and Excited Disc (that White looks like polyester resin or some dielectric paint)

yes i scratched it off 

On 03/01/2026 at 8:36 PM, Admin said:

,,,mitiche...please tell me how you posted the images above...!!!???

im using postimg.cc

withe antenna without antenna 

hello sir i didn't get a good result its the same result with or without antenna 

im using the 1800 model and i think my aria is using band 40 

can i make changes to the antenna to get a batter result or maybe im bot using it correctly ? 

i have a TOPLINK model : HW593Pro it hase 4 antennas and im usin the last one from the left side 

finished most of the work i need my toolstik to solder properly maby ill finish tomorrow 

okay thanks i will post the outcome once i finish 

ps im working next 2 days so i will finish in 3 days thanks again 

On 21/12/2020 at 8:05 AM, Admin said:

,,, for the 1.8 GHz band, other dimensions are needed...!!!

hello sir thank you for your kindness im working this one for 1800 mhz my question is can i use 2 feed ? 

and about the isolation in Dv is it better with isolation or without