bejonet

wow... it is big antenna..

possibility of problems with wind gusts

hi admin...

it is posible to copy mantbox reflector for this sector antenna???, mimo with single polarization of course..

Correction, i use 0.4mm galvanis sheet not 4mm

and today i adding reflector, indoor place, get 21 tv channel 19 clear picture. Thank,s admin...

7 minutes ago, Admin said:

,,,missing director and reflector....!!!

No,,,, use director but without reflektor. 

Without director is it not working, maybe tomorrow i  try attach the reflector

antenna test without reflector

i get 3 digital tv broadcast (same as biquad i use before)

17 analog tv broadcast, but more clear picture than my old wire biquad, some bad signal  for uhf 22-28 and uhf 52-60,

maybe there are another option for 300mhz bandwith? Thanks,,

use galvani sheet 4mm, how to connect the coax cable, i dont have flux for solder galvanis or maybe use bolt and nut, and pixelglass replaced with styrofoam it would be?

18 hours ago, Admin said:

,,, I think it's a better option...0,5...0,7GHz(200MHz bandwidth)

dimension and material for this antenna please,,,

yes, i was tested and it working very good, i like it

what polarization and angle beamwidth for this antenna?

if add more patch, can be increase the gain?

for the feed, whether it is right on the edge or there is a distance from the edge

the antenna is finished, can it use the teflon sheet to cover it?

3 hours ago, Admin said:

,,,,good, I do not know if that's what you're happy with ...

ok, I will try this antenna, can you give me  a detail please,,,

how about this,,,

thanks, but not as I expected, digital tv (maybe 5-6) works at a frequency of 400-500 and most tv broadcasts are in the frequency of 470-799mhz.

that means for fbiquad antenna it is not possible to work at 400-800 frequencies?

10 hours ago, Admin said:

 

this one, please,,,

ok,, how to connect director and what material using between director and wire.

i have made biquad antenna for TV, reference at biquad calculator, frequensi from 470-800Mhz and place in indoor it is working good but not really good, 

a question is, there are way to tunning this antenna for best result..

chances are less precision, because cutting by scissors,,,

just make the reflector

it is possible for mimo???

thank you, will remain faithful to wait for the results of the details

good thank you,, but it is for 1800mhz, that i need is 2300-2700mhz

and where i found the detail...?

if I'm not wrong

On 4/23/2017 at 8:35 PM, Admin said:

After an idea of Vman...

this one?? but with eight patch right...

I think not easy to find wire with 1,6 size,  if i change the wire size to 1.5 or 2 mm. is there a change in antenna measurement, maybe the distance between the patch and the reflector, or the size of the patch or other?

or do you have to still use the wire size to get best results?

1 hour ago, fitrisartika said:

can we get the measurement of this antenna? 

maybe you can tried amos for antenna with wire element, it is good and simple to made...